File Name: anubis-calculator-106.hqx (204 k)
Date: Jun 09, 1999
From: John Subject: Anubis Calculator 1.0.6 Anubis Calculator 1.0.6 Requires PPC macintosh. Author: Anubis, Inc. http://anubisweb.com

File Name: appletree-133.hqx (1040 k)
Date: Feb 19, 1999
From: [email protected] Subject: AppleTree1.3.3 - a statistics tool for multinomial modeling AppleTree is an application for statistical modeling. It allows to fit multinomial binary tree models of arbitrary size to frequency data using the "General Processing Tree" algorithm developed by Hu and Batchelder (1994). AppleTree can read model files and data files written for the MS-DOS "MBT" program developed by Xiangen Hu, University of Memphis, Tennessee. Multinomial models can be created with a built in graphical editor. Restrictions to the models can be added using a graphical interface. AppleTree fits model parameters to frequency data, it provides estimates for the free parameters together with confidence intervals, it provides power analyses for a given model, and it allows for checking the identifiability of a model. AppleTree is freeware. It runs natively on both 680x0 and PowerPC Macs. See for latest informations. Changes since version 1.2.1: * Graphical model editor * Power analysis * Generates expected data sets for a given model * MacOS 8.5 support (Appearance Manager, Navigation Services, proportional scrollbars, etc.) Requirements * MacOS 7.5 or later * Motorola 68020 or better (no FPU required) or any PowerPC. PowerPC recommended. Rainer Rothkegel, University of Trier, Germany

File Name: argybee.hqx (428 k)
Date: Aug 11, 2000
From: Allan Udy Subject: Argybee Submission Arybee 1.0.1 Argybee is a simple, freeware, RGB colour-Hex calculator. This application is a very simple program to allow software (and web) developers to calculate a hexadecimal representation of an RGB colour. In addition the value of the RGB sliders is also displayed at the left hand side of the window. This is useful when you are using development environments that require the RGB colour in the form RGB(red, green, blue) where the colours are a number from 0 to 255 (rather than hex). Note that you can also enter a hexadecimal number into the 'Hex Value' field, and Argybee will display the correct colour. Argybee will run on all Macintosh computers. It requires 1300K of free RAM, and a minimum of System 7.1. A version for Windows 95 (minimum) is also available. Cheers, Allan

File Name: atomic-mac-23.hqx (324 k)
Date: Aug 11, 1999
From: [email protected] Subject: The Atomic Mac 2.3.0 The Atomic Mac is a periodic table of the elements for the Macintosh. In addition to the usual information, The Atomic Mac also contains a wealth of nuclear information on each isotope, including half life, decay mode, daughter product information, and fluorescence and binding energy. Shareware: $20 Chris Smolinski - Web URL: http://www.blackcatsystems.com Macintosh Software, Shortwave Radio, Spy Number Stations

File Name: bandwidth-calc.hqx (24 k)
Date: Dec 12, 1997
From: [email protected] Subject: Newton Bandwidth Name: Bandwidth Calculator reqs: Newton NOS 2.0 or higher description The Bandwidth Calculator is just that.. a Bandwidth Calculator.. Please send me an email if you like it, or have any comments. Newton Developers are welcome to the source code as long as they give credit if they use a large chunk of it. Elwin Loomis [email protected] please email me any comments..

File Name: bioassistant-11-fat.hqx (644 k)
Date: Feb 17, 1998
From: [email protected] Subject: BioAssistant-11-fat BioAssistant was designed to assist PCR chemists in everyday PCR chemistry applications, such as probe setup and design, MasterMix solution protocol setup, DNA sequence manipulation, and Peptide visualization. It is based on Chaotic Software's first PCR chemistry applcation, Probe Assistant, but takes it a huge step forward by introducing a whole lot of new features, redesigned interface, and a bunch more. Version 1.1 adds the ability to save PCR Master Mix setups, as requested by several of our users. More feedback, as usual, is very welcome at Chaotic Software. In this case, though, applications of this nature must be accurate, and based very much on what YOU, the chemistry (or other life science discipline) lab user, would like to see in such a software package. Therefore, if you find any bugs, or if you have some suggestions for improvement, please let us know. We would love to make BioAssistant work for you in all the ways you expect. BIoAssistant, as with all Chaotic Software products, may be freely distributed on any NON-COMMERCIAL distribution. Please write for further information on distribution rights. Contact information: Chaotic Software, Ltd. www.chaoticsoftware.com [email protected]

File Name: bi-product-11.hqx (1068 k)
Date: Jun 22, 2000
From: kotka Subject: Bi-Product 1.1 Please replace the application Bi-Product.hqx with this upgraded one. Bi-Product a freeware application for programers or anyone interested in computer math conversions. It converters Characters or ASCII# into Hex, Octal and Binary. If you find it useful please email me. James Kotka [email protected] "If we knew what it was we were doing, it would not be called research, would it?" ----Albert Einstein----

File Name: cadviewer-light.hqx (396 k)
Date: Dec 04, 1998
From: [email protected] Subject: cadviewer-light cadviewer-light - the ArNoNa CADViewer Light is a free CAD Viewing Java applet. It can be used to view AutoCAD drawings saved using the DWF internet format. Once placed on a Web site, anyone visiting will be able to view DWF drawings with no installation. Works on Windows/Mac/Unix etc.

File Name: calc-it-10.hqx (1044 k)
Date: Jan 01, 1999
From: Ethan Rutter Subject: CalcIT 1.0 Need a more powerful calculator than the one that ships with the Mac? CalcIT is a full-featured scientific calculator with larger (i.e., easy-to-read) buttons and display, decimal/hex/binary and degrees/radians/gradients modes, units conversions, and customizable interface.

File Name: calc-it-11.hqx (796 k)
Date: Dec 05, 2000
From: Ethan Rutter Subject: CalcIT1.1.sit.hqx Here's the abstract for CalcIT 1.1, uploaded today: Need a more powerful calculator than the one that ships with the Mac? CalcIT is a full-featured scientific calculator with larger (i.e., easy-to-read) buttons and display, decimal/hex/binary and degrees/radians/gradients modes, units conversions, and customizable interface. Version 1.1 completely revises the calculation engine for greater speed and precision, adds an optional log file, and includes interface improvements. CalcIT received TUCOWS' 5 cow rating (out of 5). There are PPC and 68K versions available at the MR Stuff Shareware home page .

File Name: calc-plus-plus-48.hqx (164 k)
Date: Apr 19, 1996
From: (Gerard Hammond,) [email protected] Subject: Calc++ v4.8 Newton Calculator A Newton Scientific Calculator Gerard Hammond [email protected]

File Name: calculator-ii-15.hqx (100 k)
Date: Apr 16, 1999
From: Joe Cicinelli Subject: Calculator II v1.5 Date: Thu, 26 May 1994 08:44:55 -0700 Calculator II v1.5 Copyright 1991-94, Joe Cicinelli. Purpose: Calculator II is a pleasant looking color multi-function calculator that runs as an application under system 6.x or System 7. The calculator was written as an application to be run under MultiFinder or System 7 alongside other applications. It improves on AppleUs original calculator by adding trigonometric functions, functions for base 10 and natural logorithms and their inverses, hex-to-decimal and decimal-to-hex conversion, a percent increase/decrease key, a memory function for storing values across uses of the program, and all of these functions can be invoked by using the F-Keys on the Apple Extended keyboard (F5 - F15). The calculator also allows users to correct trailing digits of values entered on the display of the calculator through the use of a backspace key. A Ticker Tape is also provided to display the results of past calculations. Balloon help and general information about the program is available under either the Help menu under System 6.x or the Balloon Help menu under System 7. This software is being distributed as FREEware so give it a try and let me know what you think! This version of the calculator contains the following bug fixes and enhancements: - Fixed the mechanism for producing error dialogs. - Added an option in the preferences dialog for showing the thousands separator on both the display and ticker tape of the calculator. - The Ticker Tape now will automatically open when the program launched if it was left open the last time the calculator was used! - Fixed an annoying flash in the help window when opened from About dialog box. - Changed the format of the Preferences file (again!). Throw out your old Calculator II Prefs file before using this version of the calculator. - Fixed a bug that permitted the entry of a decimal separator in a Hex value. - Fixed a bug that permitted the entry of Hex values as input to the Hex function. - Added support for non-U.S. formatted decimal and thousands place separators (finally!). These characters can be changed from the Numbers control panel under System 7. - The calculator now does a better job remembering and restoring windows on multiple montior systems.

File Name: california-30.hqx (16 k)
Date: Oct 21, 2000
From: David Mueller Subject: California 3.0 California is a calculator program. It provides the ability to perform addition, subtraction, multiplication, division, exponents, square roots, tangents, cosines, sines, cotangents, cosecants, secants, arctangents, and natural logarithims. This submission replaces California 2.03.

File Name: car-lease-10.hqx (1272 k)
Date: Jun 24, 2003
From: Patrick Van der Perre Subject: Car Lease 1.0.2 for Mac OS X Car Lease 1.0.2 for Mac OS X Description Car Lease is an easy-to-use vehicle lease calculator that uses the money factor method to calculate monthly lease payments. Lots of details are provided so that the user can see how vehicle leasing actually works. * * * What's new in this version? - results can now be printed from within the application - proxy icons - better handling of defaults - new default for discount added - fields remember their precision between saves - fields now auto-reformat when they lose the focus * * * Download URL Mac OS X version: http://www.paranzasoft.com/downloads/CarLease.dmg.sit * * * System Requirements Mac OS 10.1 or later. * * * Shareware Fee - Single User License: 5 USD * * * More information Web site: http://www.paranzasoft.com Info: [email protected] ParanzaSoft

File Name: coordinates-100-x.hqx (1476 k)
Date: Oct 02, 2004
From: "John W. Robbins" Subject: CoordinatesX 1.0.0 - Planetary Surface Coordinate Calculator for OS X CoordinatesX 1.0.0 is an application that transforms geodetic and Cartesian coordinates. It will make the conversions from Geodetic latitude, longitude and heights to planet centered Cartesian coordinates and vice versa. Works for various planetary ellipsoids, including user defined ellipsoids. Additionally, CoordinatesX will also compute long geodesic lines on the ellipsoid. Given a starting latitude and longitude, a distance and a direction, CoordinatesX will compute the location of the end point. Also, it will compute the geodesic length and directions between two points of known latitude and longitude. Baseline lengths and ellipsoidal chord length computation are possible too. Documentation of associated algorithms accompanies the application. Coordinates is offered as freeware. May be distributed. Functions on PPC under OSX 10.3 and later. Not recommended for anything running OS9 or below. The current OS9 version is Coordinates 2.4.3, available on the archive John Robbins - Consultant, Geodesy and Geodynamics

File Name: coords-243.hqx (440 k)
Date: Jan 01, 2002
From: "Fr. John Robbins" Subject: Coordinates 2.4.3 - Planetary Surface Coordinate Calculator Coordinates is an application that transforms geodetic and Cartesian coordinates. It will make the conversions from Geodetic latitude, longitude and heights to planet centered Cartesian coordinates and vice versa. Works for various planetary ellipsoids, including user defined ellipsoids. Additionally, Coordinates will also compute long geodesic lines on the ellipsoid. Given a starting latitude and longitude, a distance and a direction, Coordinates will compute the location of the end point. Also, it will compute the geodesic length and directions between two points of known latitude and longitude. Documentation of algorithms used accompanies the application. Coordinates is offered as freeware. May be distributed. Functions on PPC under OS8.5 and later. Not optimized for OS X. John Robbins - Consultant, Geodesy and Geodynamics

File Name: crack-client-control.hqx (24 k)
Date: Feb 10, 1998
From: [email protected] Subject: RC5/DES utility: Crack Client Control Raise your DES/RC5 stats standing, and support the Mac all at once! The purpose of this program is to allow you to take advantage of Macs that are normally shut down for the night, but whose extra processing power you've not been able to tap into because it would be "politically incorrect." Robert E. Williams

File Name: crystal-ball-306.hqx (1808 k)
Date: Mar 04, 2002
From: CrystalBall Subject: Crystalball updated Numerous Bug fixes from 3.0.5 3rd Edition (D&D) Dungeons and Dragons DM Utility. Random Treasure Generator based on Encounter Level, Experience Award Calculator Quickly create any character class (3rd editon) from the Players Handbook, Monster Manual, Psionics Handbook, and Oriental Adventures. Generate you own Monsters to throw at your players. Combat utility for DM's to keep combat simple and moving quickly. Generate literally millions of random names for People and Places. A must for any MAC Dungeon Master. Download the Carbonized OSX version at http://www.geocities.com/crystalballmac http://homepage.mac.com/crystalballmac

File Name: curvz-builder-102.hqx (740 k)
Date: Feb 28, 2004
From: Roland Kjellander Subject: Curvz Builder 1.0.2 - graph maker Curvz Builder 1.0.2 - graph maker with calculation & drawing tools Submission to Science_&_Math Description: ------------------------------------------------------- Curvz Builder ... is a Mac shareware program for high quality x,y graphs. ... features immediate plotting of imported data. ... is a graphically oriented plotting program with drawing facilities. ... provides data-sheets with calculator for easy data manipulation and calculations. ... can generate plots from arithmetic expressions that may include elementary functions. ... has a mathematically oriented text string editor. ... has a magnification tool for visual inspection of various details of the plotted curves. ... can produce smooth curves from few data points. ... utilizes high resolution printing (e.g. spline curves on PostScript Laser Writers). The graph itself is the central item in the user interface of Curvz Builder. Various tools for data handling - including data sheets and calculator - are activated only when needed. One can copy a table of data from, for example, a spread sheet program or a text editor and paste it into a plot window. Curvz Builder then plots the data as curves without any further action of the user. Curvz Builder can import tables of data from a TEXT file directly into a plot and immediately produce the curve(s). Optionally one may import, enter or create the data in a data-sheet window of Curvz Builder and then plot the curve(s) by simply pressing a button. Curvz Builder treats each curve, frame of reference, scale or axis label as an individual graphical object which can be changed, copied and pasted. Various graphical elements can be added and modified with the drawing tools. Curvz Builder makes an effort to produce a visually appealing plot, but you may change virtually all details of the plot to suit your needs. ------------------------------------------------------- System requirement: Mac OS 9 or earlier. Product page: http://www.kagi.com/rkjcurv/CurvzBuilder/ Email: [email protected] -------------------------------------------------------

File Name: data-loom.hqx (992 k)
Date: Oct 21, 2000
From: Carl Manaster Subject: dataloom1_1.sit.hqx - Multivariate Data Visualization Data Loom 1.1 is now available. This new version features coloring and the ability to select traces that are similar to a given trace. Data Loom is a freeware Macintosh program for exploring multivariate data. It displays the data in a parallel coordinates chart, where each data variable is represented by a vertical axis and each data point is represented by a trace drawn across all the axes. Such charts can help you to see relationships between variables and to identify and characterize outliers in your data. System Requirements o Mac OS 8.1 or higher o PowerPC Macintosh o 2MB available RAM Send questions about Data Loom to [email protected] For more information about Data Loom, visit http://www.concentric.net/~manaster/software/dataloom/ NOTE TO THE ARCHIVIST: Feel free to include on the commercial CD of the archives. Thanks!

File Name: displacement.hqx (1024 k)
Date: Mar 31, 2000
From: Mike Brackenridge Subject: Displacement Displacement_ English fat version 1.0 23/03/2000 -- The Program: - Displacement is a program for working out the displacement in engines. - Calculations are made by entering the stroke, bore and number of cylinders - in units of either inches or millimetres, calculations are output in cubic - inches, litres and cc in the entire engine and per cylinder, decimal point - output options can be changed via the preference menu. - Displacement is available in both English and Spanish versions. - Displacement is a freeware program. Requirements: - OS7.5 or above Compressed size: - 956k Enquires and questions should be directed to: mailto:[email protected]

File Name: download-time-calculator.hqx (112 k)
Date: Nov 20, 1998
From: [email protected] Subject: Download Time Calculator 1.2 Download Time Calculator 1.2 - is a simple application that determines the time it takes, in minutes and seconds, to transfer a file. Download Time Calculator can be placed in the Apple Menu Items for quick access when you want to determine how long it is going to take to download a file from the internet, bulletin board system, over a network, etc. It's great for estimating how long you must wait before a file is transferred, whether you are uploading or downloading. Many web browsers do not give an accurate time estimation of how long it takes for a file to download from the internet, but with Download Time Calculator you can get an more accurate estimation. SYSTEM REQUIREMENTS: 170k of disk space, 175k of RAM, A Color Capable Mac with system 7.0 or greater.

File Name: drip-calc-10b.hqx (16 k)
Date: Feb 13, 1998
From: [email protected] Subject: DripCalc DripCalc - is a small (11k installed) calculator for figuring IV medication doses for 16 common ICU drugs. Useful for anyone who spends a lot of time with ICU patients. For example, if your patient is on dobutamine at 4 cc/hr mixed as 1gm/250 cc and weighs 80 kg, DripCalc can tell you that represents 3.33 mcg/kg/min. It knows which drugs are measured in 'per kilo', and gives ranges and loading doses. DripCalc has been tested for accuracy but is still in beta form -- read the accompanying file for more information. Comments and bug reports are appreciated. Freeware by Alan Simon ([email protected]).

File Name: dt-calculator.hqx (16 k)
Date: Aug 20, 2000
From: "Dr. Stefan P. Mueller" Subject: DT Calculator DT Calculator is a no-frills scientific RPN calculator (24k disk space). I don't know who wrote it but the file was created on June 15, 1990 and it still works. I believe it's not supported and free but please let me know if there are still any shareware claims.

File Name: econ-calculator-68k-111.hqx (792 k)
Date: Aug 29, 2001
From: Mike B Subject: Econ Calculator 1.1.1 - Eng 68k Econ Calculator 1.1.1 English 68k 23/08/2001 -The program This is a simple to use calculator which has settings to make both single auto calculations or multiple calculations, this is an ideal replacement to the calculator provided with your OS, still keeping things simple but also with the addition of a few more options such as a more appealing user interface, being able to save your calculations as a text file and having the facility to print, multiple calculations are written into a simulated paper roll at the bottom of the calculator and can be saved as a text file or printed out from the "Print" menu. Calculations possible include addition, subtraction, division, multiplication and square root. Online user guide at: http://econsoftware.com/econcalculator_111UG.html -Changes (NEW) Enter key can now be used to calculate sum. (CHANGE) "Rubber" button removed. (CHANGE) The "C" button now becomes the "C/CE" key, this replaces the function of the green "Rubber" button which has been removed. (CHANGE) Keyboard layout. -Requirements: Power Mac running OS7.5 or above, not OSX compatible. -Compressed Bin Hex size: -544k ............................................. -Web: http://econsoftware.com/econ.html -Enquires and questions should be directed to: mailto:[email protected]

File Name: econ-calculator-deluxe-68k.hqx (992 k)
Date: Aug 29, 2001
From: Mike Brackenridge Subject: Econ Calculator Deluxe 1.0 68k Econ Calculator Deluxe 1.0 68k 26/08/2001 -The program This is the Deluxe version of Econ Calculator which has settings to make single auto calculations, multiple calculations, or multiple calculations in Adding machine mode. This is an ideal replacement to the calculator provided with your OS, still keeping things simple but also with the addition of a few more options such as a more appealing user interface, being able to save your calculations as a text file and having the facility to print, multiple calculations are written into a simulated paper roll at the bottom of the calculator and can be saved as a text file or printed out from the "Print" menu. Calculations possible include addition, subtraction, division, multiplication and square root. Online user guide at: http://econsoftware.com/econcalculatordeluxe_1UG.html -Requirements: Power Mac running OS7.5.3 or above, not OSX compatible. -Compressed Bin Hex size: -916k ............................................. -Web: http://econsoftware.com/econ.html -Enquires and questions should be directed to: mailto:[email protected]

File Name: econ-calculator-dlx-151-ppc.hqx (2800 k)
Date: Aug 25, 2002
From: Mike B Subject: Econ Calculator Deluxe 1.5.1 Classic Econ Calculator 1.5.1 Classic - English version 22/08/2002 -The program This is the Deluxe version of Econ Calculator which is a simple to use calculator having three calculation modes, normal calculator, calculator with tape (simulated paper roll) or calculator with tape running in Adding machine mode. This version allows the user to round from an integer "0" decimal places through to 6 and offers a "Fixed" decimal setting that auto rounds to 2 decimal places. The calculator can be "Iconized" to a global button and has many more options of user customization. This is a shareware program with a price of US$15. -Changes 1# Total interface redesign. 2# File saving with the option to enable or disable. 3# Saved files can be opened in Econ Calculator Deluxe and added to or printed out at a later date. 4# Sub total button added for normal and Adding machine mode Tape calculations. 5# Option to select separate font and font sizes. 6# Multiple calculations can now be made in what was single calculation mode. 7# Option to add date. Comments or line breaks to the tape. 8# Versions now available for both OS Classic and OSX. 9# Many other useful changes that make Econ Calculator a much better calculator. -Requirements: Power Mac running OS8 or above, not OSX compatible. -Compressed BinHex size: -2.7MB -This program can be used on CD distribution. -Web: http://www.econsoftware.com/ -Enquires and questions should be directed to: mailto:[email protected]

File Name: econ-calculator-dlx-151-x.hqx (2980 k)
Date: Aug 22, 2002
From: Mike B Subject: Econ Calculator Deluxe 1.5.1 Carbon Econ Calculator 1.5.1 Carbon - English version 22/08/2002 -The program This is the Deluxe version of Econ Calculator which is a simple to use calculator having three calculation modes, normal calculator, calculator with tape (simulated paper roll) or calculator with tape running in Adding machine mode. This version allows the user to round from an integer "0" decimal places through to 6 and offers a "Fixed" decimal setting that auto rounds to 2 decimal places. The calculator can be "Iconized" to a global button and has many more options of user customization. This is a shareware program with a price of US$15. -Changes 1# Total interface redesign. 2# File saving with the option to enable or disable. 3# Saved files can be opened in Econ Calculator Deluxe and added to or printed out at a later date. 4# Sub total button added for normal and Adding machine mode Tape calculations. 5# Option to select separate font and font sizes. 6# Multiple calculations can now be made in what was single calculation mode. 7# Option to add date. Comments or line breaks to the tape. 8# Versions now available for both OS Classic and OSX. 9# Many other useful changes that make Econ Calculator a much better calculator. -Requirements: Power Mac OSX (10.1x) and/or can be run on Classic OS9x with CarbonLib installed. -Compressed BinHex size: -2.9MB -This program can be used on CD distribution. -Web: http://www.econsoftware.com/ -Enquires and questions should be directed to: mailto:[email protected]

File Name: econ-calculator-ppc-111.hqx (1000 k)
Date: Aug 29, 2001
From: Mike B Subject: Econ Calculator 1.1.1 - Eng PPC Econ Calculator 1.1.1 English PPC 23/08/2001 -The program This is a simple to use calculator which has settings to make both single auto calculations or multiple calculations, this is an ideal replacement to the calculator provided with your OS, still keeping things simple but also with the addition of a few more options such as a more appealing user interface, being able to save your calculations as a text file and having the facility to print, multiple calculations are written into a simulated paper roll at the bottom of the calculator and can be saved as a text file or printed out from the "Print" menu. Calculations possible include addition, subtraction, division, multiplication and square root. Online user guide at: http://econsoftware.com/econcalculator_111UG.html -Changes (NEW) Enter key can now be used to calculate sum. (CHANGE) "Rubber" button removed. (CHANGE) The "C" button now becomes the "C/CE" key, this replaces the function of the green "Rubber" button which has been removed. (CHANGE) Keyboard layout. -Requirements: Power Mac running OS7.5 or above, not OSX compatible. -Compressed Bin Hex size: -852k

File Name: elemfin-121-ppc.hqx (400 k)
Date: Mar 26, 1999
From: [email protected] Subject: ElemFin-1.2.1-PPC ElemFin-PPC-121-EN is a calculation programme based on the principle of the finite elements. It makes it possible to solve plane problems with elements: bars, beams and triangulars. As well as space problems with elements: bars and beams. Lastly, ElemFin allows the calculation of: displacements of each nodes, reactions to the supports and stress in each element. Version PPC

File Name: euro-convert.hqx (964 k)
Date: Oct 18, 1999
From: Mike Brackenridge Subject: Euro Convert Hello Info-Mac, Here is a shareware program for Macintosh called "Euro Convert" for making Euro conversions for the !! member countries of the EUM. This is not the same program as "Euro Converter 1.0" by Active Software, this is another Euro Conversion program / calculator by another author.

File Name: evergreen-4010.hqx (40 k)
Date: Aug 11, 1993
Date: Sun, 8 Aug 93 17:10:36 -0600 From: [email protected] (zmolek andrew c) Subject: evergreen-4010.sit.hqx (Tek 4010 emulator) This is a Tektronix 4010/VT100 emulator I found on AOL. It's a little old and clunky, but apparently free. It was written by Kenneth Chin-Purcell at the University of Minnesota in 1986. For those who use Mathematica remotely (and may not have been aware), tek graphics can be initialized by entering <File Name: falcon-nc-201.hqx (224 k)
Date: Mar 15, 2000
From: [email protected] (appajt) Subject: FalconNc 2.0.1 March 10, 2000 ==================== FALCON-NC vers 2.0.1 RPN/Algeabraic Scientific calculator. ==================== This is not your ordinary calculator. Its a true RPN and ALGEABRIC calculator in the same package. You can even switch mode right in the middle of a problem solving sequence. It has superior formatting of results ( 30 23 43 ) and even automatic ISO and US delimiter setting. (if you use a coma in entering a number it use it as the delimiter, the same for the period ) With this calculator you have on-the-fly base conversion, mixed base arithmetic, unsigned numbers conversion, and more. The application has been tested with machines from MacPlus and MAC OS 6.0.2 up to Mac OS 9.0 and the newest PowerBook G4 machines. The Financial mode has automatic features that simplify the calculation of the basic financial function of Interest, Present Value, Future Value and Payments. It even has Canadian Mortgage calculation functions. It has been updated and tested to work on the latest G4 machine ( PowerBook included ). This application works as well with the older Mac like the Plus and the SE. The calculator has automatic continuous memory of 2000 registers. There is also a lot of shortcuts for the various modes of the calculator. . Jacques Thriault

File Name: finkit-124.hqx (1252 k)
Date: May 29, 2003
From: Patrick Van der Perre Subject: FinKit 1.2.4 for Mac OS Classic Description FinKit is a multi-function financial calculator that lets you solve problems involving the time value of money. * * * Download URL Mac OS Classic version: http://www.paranzasoft.com/downloads/FinKitClassic.sit * * * System Requirements FinKit for Mac OS Classic needs Mac OS 8.5 or later and a PPC to run. * * * FinKit for Mac OS Classic is freeware. * * * More information Web site: http://www.paranzasoft.com Info: [email protected]

File Name: floating-calc-152e.hqx (584 k)
Date: Sep 20, 1999
From: Masato Saito Subject: FloatingCalc version 1.5.2 I'm new at submitting files. I would like to regist my updated software to the info-mac archive. I have just released FloatingCalc ver1.5.2, this is a calculator that displayed everytime.

File Name: frak-kalk-10.hqx (176 k)
Date: Sep 29, 2002
From: Goldfish Subject: FrakKalk ->FrakKalk is a calculator that performs operations on fractions. Unlike traditional calculators and most computer-based calculators, FrakKalk gives its results as simplified fractions, not decimals. FrakKalk lets you add, subtract, multiply, and divide fractions, and it also lets you convert fractions to decimals. A built-in help system is included. FrakKalk is freeware, and is compatible with OS 10.1.2 and up. More information can be found at: http://homepage.mac.com/goldfish1/FrakKalk.html<-

File Name: geometry-calc-151-sp-crb.hqx (1136 k)
Date: Dec 17, 2000
From: Mike Brackenridge Subject: Geometry Calculator 1.5.1 Carbon Espanol Geometry Calculator 1.5 Carbon Espanol 17/12/2000 -El programa Este es un programa de calculacion y conversion, para hacer calculo en area de triangelos, rectangelos, trapezoide, circulos y superfice de cubos, pirimides, prismas, y cilindros y conversion en metrico a imperial o imperial a metrico del mismo. Shareware. -Requerimientos: Geometry Calculator 1.5.1 Version classic ( Mac OS 8.5 up) Este version funciona con min 3024k en memoria RAM ( 3424k preferido )

File Name: geometry-calculator-201.hqx (1320 k)
Date: Feb 01, 2001
From: econsoftware Subject: Geometry Calculator 2.0.1 English PPC Geometry Calculator 2.0.1 English PPC 29/01/2001 -The program Use Geometry Calculator to calculate the area of triangles, trapezoids, rectangles, squares, circles with surface area and volume of cubes, pyramids, cones, prisms, cylinder and spheres, you can use the measurements as "Non specific units" or you have the option of entering a specific unit and have the calculations converted to many other imperial and metric units. Runs as full 30 day tryout, after this time registering the program will enable it fully again. -Changes in this version Fix on the preference file creation. -This program is Shareware with a cost of $19 US. -Requirements: Power Mac running OS7.6.1 or above. -Compressed BinHex size: -1000k -This program can be used on CD distribution. -Web: econsoftware.com/econ.html -Enquires and questions should be directed to: mailto:[email protected]

File Name: googolator-13.hqx (248 k)
Date: Mar 20, 2002
From: Andrew Trevorrow Subject: Googolator 1.3 Googolator is a small, fast, arbitrary-precision calculator for those times when you can't be bothered starting up Mathematica. :) It lets you do exact calculations with arbitrarily large numbers (limited only by memory). It can also input/output numbers in any base from 2 to 36. At the moment only integer arithmetic is supported. Googolator 1.3 is a Carbonized app that runs natively on OS X. It also runs on OS 8.6/9.x if CarbonLib 1.3 or later is installed. The shareware fee is $20. For more details see: http://www.trevorrow.com/googolator Andrew Trevorrow ([email protected])

File Name: graf-term.hqx (16 k)
Date: Jun 29, 1992
Date: Tue, 30 Jun 92 00:36:33 EST From: [email protected] (Elliotte Harold) Message-Id: <[email protected]> To: [email protected] Subject: Grafterm tektronix emulator Resent-To: [email protected] Resent-Date: Mon, 29 Jun 1992 22:45:42 PDT Resent-From: Info-Mac Moderator This is a basic Tektronix and vt100 terminal emulator with support for Tektronix 4010/4014 style line graphics. It's fairly old and may or may not be compatible with later hardware and systems (It does work on an SE/30 running system 6.05.) but since a recent search of the archives turned up NO shareware or freeware Tektronix emulators and since it will be referenced in the forthcomin FAQ for comp.sys.mac.comm I thought, I'd upload it. $50 shareware.

File Name: gs-graphin-stuph.hqx (76 k)
Date: Nov 23, 1999
From: [email protected] Subject: Gammasoft Graphin' Stuph This is a graphing calculator. There is a black-and-white version and a color version. The color version can only plot points, while the black-and-white version can draw smoothly. These files require the Gammasoft Runtime Engine. If you don't have the Gammasoft Runtime Engine, you can download it from this server or, if you have MacOS Easy Open enabled, use the HyperCard Player instead. When you decompress these files, be sure to put them in the same folder as the Main Menu file. Also put aliases of the Graphin' Stuph and Graphin' Stuph Color files in the `Data folder. Make sure the aliases don't have an " alias" suffix or a space after their name.

File Name: haxial-calculator-12.hqx (552 k)
Date: Dec 29, 2004
From: Haxial Subject: Haxial Calculator 1.2 Haxial Calculator is a high precision mathematical assistant that evaluates normal (infix) expressions to practically any accuracy. Results can be viewed in normal, fraction or scientific forms and the option of working in a different radix no longer restricts you to the decimal system. Worksheets enable you to solve larger problems in a more suited environment as well as allowing you to save your work. In addition Haxial Calculator incorporates unit and radix conversion utilities for your convenience as well as complete support for variables. Other calculator programs blindly attempt to copy physical hand-held calculators by displaying buttons on the computer screen, and an appearance and function that closely mimics a hand-held calculator. At Haxial, we believe this approach is fundamentally flawed. A computer is a far more powerful device than a hand-held calculator, and thus it is illogical and limiting to duplicate hand-held calculators on a computer. Haxial Calculator allows you to freely type expressions in a form natural to humans and much more suited when using a computer keyboard. For example, you can type a formula such as this into Haxial Calculator: 34 + e^(56 - 24.6487) * 1.24 When you press enter/return Haxial Calculator will interpret the expression, check for syntax errors, evaluate the result and display it to screen using the display mode and accuracy of your choice. Freely typing expressions is far superior to other methods such as clicking buttons. More information at: http://www.haxialsoftware.com/products/calculator/

File Name: hc-calculator-10.hqx (88 k)
Date: Jun 30, 2002
From: "Scott G. (SPC4/DC2000)" Subject: Calculator 1.0 By Scott Garrett ++ | | Calculator 1.0 Abstract | | +===================================================================+ |_Version_| 1.0 for HyperCard 2.4 or later | |_Creator_| Scott Garrett | |__CInfo__| This is a very simple calculator program I wrote with | | HyperCard 2.4b16. It is mouse-controlled and I also added a | | feature that will allow you to remember a number for later use. | | Since this version is my first, it has some bugs in it. | | Here are ones that I know of right now: | +{ Bugs } + | Calculator cant calculate problems that contain multiple signs. | | (In other words, it cant, yet, figure out what 12x12-3+142 is.) | | The workarond to this is to do the first part (like 12x12) then | | press the = button. Then you would start doing somthing like | | this: 144-3 {equals} 141+14 {equals} 1552 {equals} 77.5. 77.5 | | would be your answer. (If you dont get this, ask me to send you | | an GIF animation of me doing this.) | |...................................................................| | The data field does not clear after you have done a calculation | | and pressed the = button. Instead it adds on to the answer. | | This may be good or bad, so Im taking a servey on this: If you | | think I should keep this feature, email me with Calculator = | | Yes in the subject. Otherwise email me with Calculator = No in | | the subject. :) | ++ | Well, anyway, if you have any questions, other bugs, or | | comments about the Calculator, email me at [email protected] | | Then, while I come out with another version of it, I will try to | | remove as many bugs as possible (excpet for the Equals button | | thing -- that depends on your votes.) :) | ++ | Scott Garrett | ftp://magarret:[email protected]/spc4_stuff | ++

File Name: i-kiwi-07.hqx (1004 k)
Date: Jun 20, 2001
From: "Pandaa" Subject: iKiwi Calculator 0.7 iKiwi is a full-featured calculator application with symbolic answers , a numerical equation solver , full support for complex numbers , boolean arithmetic including simplification of boolean expressions , notation with SI unit prefixes and a large set of constants and unit conversions for insertion into expressions. iKiwi is shareware and costs 17$. You may use iKiwi for 24 days before registering. System requirements: -MacOS 8.5 or later -Any version of QuickTime

File Name: imalc-100.hqx (2860 k)
Date: Oct 20, 1999
From: Tony Spencer Subject: iMalc100PPC.sea.hqx iMalc 1.0.0 is a scientific calculator for Macintosh which is customisable to match your favourite flavour of iMac, PowerBook, iBook, G3, G4 and platinum Mac. iMalc is designed as a replacement for the standard Apple calculator and has 18 mathematical functions and a saveable memory. PowerPC version.

File Name: ioligo.hqx (4464 k)
Date: Oct 28, 2000
From: Bob Mancarella Subject: iOligo primer designer v1.0 iOligo is a state-of-the-art primer design and purchasing program. It quickly retrieves DNA or protein sequences over the web from the National Center for Biotechnology's (NCBI) databases. iOligo designs the best oligos for PCR or sequencing reactions, and orders them directly from your favorite synthesis company. More information is available from www.CaesarSoftware.com.

File Name: jec-10.hqx (548 k)
Date: Jan 15, 1999
From: [email protected] Subject: JEC 1.0 - Just An Euro Calculator JEC 1.0 - Just An Euro Calculator Fat Binary 1999 Kuno Sandholzer [email protected] http://www.jehu.agitator.com/ Please send bug reports to: [email protected] Please send comments to: [email protected] Whats this? JEC calculates the exchange rates between the new European currency Euro and the currencies of all countries taking part in the new currency system (Belgium, Germany, Spain, France, Ireland, Italy, Luxemburg, Netherlands, Austria, Portugal, Finland). JEC was tested on a PPC with System 8.5.1. It should run on any Macintosh with a MC68020-processor under System 7.1 or later - but it has not been tested yet... any volunteers are welcome! -- Jehu Software - [email protected] http://www.jehu.agitator.com/

File Name: jeffs-calculator-101-68k.hqx (468 k)
Date: Apr 09, 1999
From: [email protected] Subject: Metric Conversion Calculator "Jeff's Calculator 1.0.1 (68k)" is, well, a calculator for your Macintosh. It has all of the functions that you might find in a basic hand-held calculator from your local electronic gadget shop plus functions that convert metric units to U.S. units and vice versa. This is an update to version 1.0 that fixes a small bug with the clear button.

File Name: jeffs-calculator-101-ppc.hqx (592 k)
Date: Apr 09, 1999
From: [email protected] Subject: Metric Conversion Calculator "Jeff's Calculator 1.0.1 (PPC)" is, well, a calculator for your Macintosh. It has all of the functions that you might find in a basic hand-held calculator from your local electronic gadget shop plus functions that convert metric units to U.S. units and vice versa. This is an update to version 1.0 that fixes a small bug with the clear button.

File Name: jmm-11b1.hqx (116 k)
Date: Oct 04, 1999
From: Gerrit Polder Subject: JMM (Java MultiMeter) JMM is data-acquisition software for digital multimeters equipped with a rs-232 port, such as the Metex 3850 and many others. The software is very simple to use and the control is straight forward. It is written in Java, and runs on the Mac. for info: http://www.ph.tn.tudelft.nl/~polder and http://www.qsl.net/pa3bya it's in the JMM page.

File Name: kines-kinetics-011-hc.hqx (76 k)
Date: Jan 23, 1998
From: [email protected] Subject: Kines&Kinetics Application Lines&Kinetics Version 0.11 Update Feb 98 Author M.G. Claros Literature Embnet.News "in press" Description A graphic way to calculate linear regressions with normal or logarithmic data, the doubling time of a microbial culture, and the kinetic parameters for an enzyme reaction. Notes Lines&Kinetics is a HyperCard Stack programmed in HyperTalk. It requires HyperCard (Player) 2.1 or later and the Home stack provided with Lines&Kinetics. The describing article is include in the Home stack that accompanies the program stack. Although I have done my best to ensure that this software is error free, I am not responsible for any misfortune you may suffer whatsoever caused through the use of Lines&Kinetics, being they incidental, consequential or otherwise. So, Lines&Kinetics is supplied "as is": it comes without any warranties, express or implied, of any kind, including fitness for purpose and merchantibility. You may find some bugs too, or things lacking which should be included. If you have comments, I would like to know them, but I do not assure to be able to fix them. You can distribute this software freely. Manuel G. Claros [email protected] [email protected]

File Name: koala-calc-203.hqx (1688 k)
Date: Dec 04, 2002
From: Macropod Software Subject: KoalaCalc_203.hqx - Multi-purpose advanced calculator KoalaCalc for Mac OS X version 2.0.3 KoalaCalc is a freeware scientific, statistical and conversion calculator for Mac OS X. In its compacted state, it looks similar to the standard calculator that comes with Mac OS X. However, simply click the 'advanced features' box and KoalaCalc comes to life to become one of the most advanced calculators available. Features include numerous mathematical functions plus 10 individual memory banks, conversion to and from dozens of units, statistical and probability calculator capable of computing t-tests and ANOVAs, tape recorde, expression calculator which follows order of operations rules, voice recognition input and speech output. Complete details and support can be obtained from the Macropod Software web site located at http://www.macropodsoftware.com. System requirements: Mac OS X 10.1.2 or later Macropod Software http://www.macropodsoftware.com

File Name: lines-kinetics-10.hqx (84 k)
Date: Mar 27, 1998
From: [email protected] Subject: Lines&Kinetics Application Lines&Kinetics Version 1.0 Update Mars 98 Author M.G. Claros Literature Embnet.News 5, 7-9 Disk size 125 Kb RAM Size The minimum requested by HyperCard Description A graphic way to calculate linear regressions with normal or logarithmic data, the doubling time of a microbial culture, and the kinetic parameters for an enzyme reaction. Notes Lines&Kinetics is a HyperCard Stack programmed in HyperTalk. It requires HyperCard (Player) 2.1 or later and the Home stack provided with Lines&Kinetics. The describing article is include in the Home stack that accompanies the program stack. Is is also available at http://www.ie.embnet.org/embnet.news/vol5_1/kinetics.html Although I have done my best to ensure that this software is error free, I am not responsible for any misfortune you may suffer whatsoever caused through the use of Lines&Kinetics, being they incidental, consequential or otherwise. So, Lines&Kinetics is supplied "as is": it comes without any warranties, express or implied, of any kind, including fitness for purpose and merchantibility. You may find some bugs too, or things lacking which should be included. If you have comments, I would like to know them, but I do not assure to be able to fix them. You can distribute this software freely. Dr. Manuel G. CLAROS [email protected] Dpt. Bioquimica y Biologia Molecular [email protected] Facultad de Ciencias Fax: (34 5) 213 20 00 Universidad de Malaga E-29071 Malaga (Spain)

File Name: love-calculator-pro-10.hqx (3476 k)
Date: Apr 01, 2003
From: Too Funky Softwear Subject: lovecalculatorpro-100.sit Filename: lovecalculatorpro-100.sit Application Name: Love Calculator Pro Version: 1.0.0 Category: Entertainment, Home Description: Love tests and match maker software. Love Calculator Pro is a serious love test and match maker tool. Based on various personality tests Love Calculator Pro performs a compatibility test of two people. It combines relationship tests from different areas such as age, biorhythms, astrology, and numerology. It can analyze and rate your relationship within few seconds. This Love Calculator's love tests includes more than just a general compatibility test. Best love test allows to find your best match in a group of people. Love Calculator Pro also calculates Timeline, short-term compatibility of a couple. It can predict baby's sex for a couple by generating baby charts of three kinds of baby tests. Love Calculator Pro is a unique match maker that helps you to find your best friend, perfect match, or even eternal love. Author: Lubos Tilka (Too Funky Softwear) Website: http://funkysw.ancodia.com E-mail: [email protected]

File Name: love-calculator-pro-10-x.hqx (3224 k)
Date: Apr 01, 2003
From: Too Funky Softwear Subject: lovecalculatorpro-100x.sit Filename: lovecalculatorpro-100x.sit Application Name: Love Calculator Pro Version: 1.0.0 (Mac OS X) Category: Entertainment, Home Description: Love tests and match maker software. Love Calculator Pro is a serious love test and match maker tool. Based on various personality tests Love Calculator Pro performs a compatibility test of two people. It combines relationship tests from different areas such as age, biorhythms, astrology, and numerology. It can analyze and rate your relationship within few seconds. This Love Calculator's love tests includes more than just a general compatibility test. Best love test allows to find your best match in a group of people. Love Calculator Pro also calculates Timeline, short-term compatibility of a couple. It can predict baby's sex for a couple by generating baby charts of three kinds of baby tests. Love Calculator Pro is a unique match maker that helps you to find your best friend, perfect match, or even eternal love. Author: Lubos Tilka (Too Funky Softwear) Website: http://funkysw.ancodia.com E-mail: [email protected]

File Name: mac-antenna-master-13.hqx (184 k)
Date: Dec 08, 1999
From: Chris Smolinski Subject: Mac Antenna Master 1.3.0 Mac Antenna Master is an antenna design package especially suited for ham radio operators and other radio enthusiasts. It determines the design parameters for the following types of antennas: Cubic Quad Dipole Fat Dipole J-Pole Log Periodic Super J-Pole Vertical Yagi It also performs the following calculations: Coil Design LC Filter Design Transmission Line Loss Mac Antenna Master is native for both 68K and PPC systems. Shareware $15 Chris Smolinski - Web URL: http://www.blackcatsystems.com Macintosh Software, Shortwave Radio, Spy Number Stations

File Name: mac-opie-100.hqx (212 k)
Date: May 29, 1996
From: (Derrell Piper) [email protected] Subject: MacOpie 1.0.0 This is the first release of MacOpie, a one-time password calculator that is compatible with the OPIE software released by the Naval Research Labs (NRL). MacOpie includes support for both the MD4 and MD5 message digest functions and is compatible with the original Bellcore S/Key(tm) distribution. The software is also compatible with the Secure/IP(tm) product from Cisco Systems, formerly TGV Software, Inc.

File Name: mac-prop-25.hqx (408 k)
Date: Sep 29, 1999
From: [email protected] Subject: MacProp 2.5.0 MacProp is a propagation forecasting application for the Macintosh, ideal for ham radio operators. MacProp calculates the Maximum Usable Frequency (MUF) for propagation between your location and over 2500 points over the entire Earth, and displays them on a convenient map. MacProp is native for both 68K and PPC systems. Shareware $15 Chris Smolinski - Web URL: http://www.blackcatsystems.com Macintosh Software, Shortwave Radio, Spy Number Stations

File Name: macspice-3f4-ppc-25.hqx (1224 k)
Date: Nov 27, 1998
From: [email protected] Subject: macspice3f4-ppc-25 It contains the PowerMac-native version of MacSpice3f4 2.5 of Spice3f4, a popular electronic circuit simulation program. PPC ONLY VERSION!!!! Homepage - http://home.earthlink.net/~wilsona/macspice.html This file should replace the previous file: macspice3f4-ppc-25b.sit.hqx. This is an update to MacSpice3f4 2.4 which adds the BSIM3 device models: BSIM3v3.2 and BSIM3SOIv1.3 and an HFET(heterostructure FET) device model. This is the final release of version 2.5. Spice was developped by the University of California, Berkeley, Department of Electrical Engineering and Computer Sciences. This binary may be included on the archive CD-ROM. I would suggest the following directory to place the files: sci/ Thank you, Anthony Wilson

File Name: mac-stock-calculator-30.hqx (28 k)
Date: Dec 15, 1999
From: george Subject: Mac Stock Calculator 3.0 Mac Stock Calculator Freeware When I first started using the Apple Computer in the 80's. There were many shareware and freeware applications circulating among Apple users. Stock Calculator, a basic stock application created by George Gaeta a LIMac member and is designed to give the user a view of what the stock is doing with just a few clicks of the mouse. Stock Calculator allows the user to ask for a percentage on the stock investment that the stock returns and also the percentage that the user would want from the stock. Stock Calculator creates a bar graph showing the percentage on the stock investment. The results can be printed for future reference.

File Name: mac-to-vga-adapters-10.hqx (8 k)
Date: Feb 27, 2005
From: [email protected] Subject: Mac To VGA Adapters 1.0 Information on how to build Mac to VGA and VGA to Mac Adapters. Includes MacII Sync on Green (Composite Sync) Adapter information. Version 1.0

File Name: mi-convert-25.hqx (1316 k)
Date: Jan 28, 2000
From: Mike Brackenridge Subject: MI Convert 2.5 This metric / Imperial conversion program just got better, now with over 300 possible unit conversions. MI Convert 2.5 is a metric / Imperial conversion program for making conversions of: Distance and Length, Square measurement calculations and conversions, Weight conversions, Liquid conversions, Temperature conversions and now Velocity conversions. Changes to version 2.5: # Added a Velocity calculation window. # Added various more units of calculation to the Distance, Length, Liquid, Square, Weight and capacity windows giving the user over 300 different configurations of conversion and calculation. # Cosmetic overhaul on all the windows. MI Convert 2.5 has over 280 output conversions over the freeware version of MI Convert Light 1.0.4 MI Convert 2.5 is $15 shareware Stuffed file size is 878k econ software web site: http://personal5.iddeo.es/mikebr/econ.html 27/01/2000

File Name: mi-convert-27-68k.hqx (940 k)
Date: Mar 12, 2001
From: econsoftware Subject: MI Convert 2.7 68k English MI Convert is a metric imperial calculator and converter for measurements of distance, length, square, weight, capacity, velocity, temperature, circumference. This is the only conversion program I know of that will give your imperial conversions in written format for distance, length, circumference to one sixteenth of an inch and to one dram in the weight conversions. Runs as full 30 day tryout, after this time registering the program will enable it again. -Changes Added fluid measurements and dry US gallons to the capacity window. Added nautical measurements to the distance and length window. The program now auto converts as the values are entered. -This program single user licence is $19 US. -Requirements: Mac running OS7.6.1 or above. This version will not run on OSX. -Compressed BinHex size: -940k -This program can be used on CD distribution. -Web: econsoftware.com/econ.html -Enquires and questions should be directed to: mailto:[email protected]

File Name: mi-convert-27-ppc.hqx (1024 k)
Date: Mar 12, 2001
From: econsoftware Subject: MI Convert 2.7 PPC English MI Convert is a metric imperial calculator and converter for measurements of distance, length, square, weight, capacity, velocity, temperature, circumference. This is the only conversion program I know of that will give your imperial conversions in written format for distance, length, circumference to one sixteenth of an inch and to one dram in the weight conversions. Runs as full 30 day tryout, after this time registering the program will enable it again. -Changes Added fluid measurements and dry US gallons to the capacity window. Added nautical measurements to the distance and length window. The program now auto converts as the values are entered. -This program single user licence is $19 US. -Requirements: Power Mac running OS7.6.1 or above. This version will not run on OSX. -Compressed BinHex size: -1020k -This program can be used on CD distribution. -Web: econsoftware.com/econ.html -Enquires and questions should be directed to: mailto:[email protected]

File Name: mortgage-maker-21.hqx (284 k)
Date: Oct 13, 1999
From: [email protected] Subject: Mortgage Maker 2.1 - Mortgage Qualification Calculator Mortgage Maker 2.1 lets you play with the variables in a mortgage loan to find the combination that lets you qualify. That's all it does, but it does a nice job of it. The program computes the "qualifying ratios" which lenders use to evaluate a loan application and it estimates the amount of actual cash required at closing time. Its Backsolve feature answers questions like "how much house can I afford on this income?" or my favorite, "How much does my spouse/partner need to make for us to get into that house." For refinances, the program compares your net monthly payment with and without the refinance. If you are a real estate or mortgage professional, the program is a handy way to create quick estimates for clients. Mortgage Maker is free for personal use, and is $10 for professional use. -- [email protected]

File Name: multi-mode-396.hqx (692 k)
Date: Apr 21, 2002
From: Chris Smolinski Subject: MultiMode 3.9.6 MultiMode allows your Macintosh to decode and transmit several different modes of non-voice communication often heard on shortwave radio. In the past, dedicated hardware, often costing hundreds or thousands of dollars, was necessary to demodulate and decode this transmissions. Today, you can use the processing power of your Macintosh to decode and display these modes, without any additional hardware, other than your Mac and a radio. MultiMode supports the following modes: Morse Code (CW) RTTY (Baudot) ASCII SITOR-A SITOR-B / FEC / NAVTEX SSTV (Slow Scan TV) WEATHER / SATELLITE FAX ACARS (Aircraft Communications) Packet PSK31 ALE (Automatic Link Establishment) DTMF, CCIR, EIA Tone Modes Hellschreiber Audio Spectrum Display / FFT Mode Requires a PPC Macintosh Shareware: $89

File Name: multi-mode-lite-396.hqx (692 k)
Date: Apr 21, 2002
From: Chris Smolinski Subject: MultiMode Lite 3.9.6 MultiMode Lite allows your Macintosh to decode several different modes of non-voice communication often heard on shortwave radio. In the past, dedicated hardware, often costing hundreds or thousands of dollars, was necessary to demodulate and decode this transmissions. Today, you can use the processing power of your Macintosh to decode and display these modes, without any additional hardware, other than your Mac and a radio. MultiMode Lite supports the following modes: Morse Code (CW) RTTY (Baudot) ASCII SITOR-A SITOR-B / FEC / NAVTEX WEATHER / SATELLITE FAX Audio Spectrum Display / FFT Mode Requires a PPC Macintosh Shareware: $39

File Name: my-monee-11.hqx (2016 k)
Date: Aug 11, 2000
From: Robert Presender Subject: MyMonEE 1.1 MyMonEE is a Repository and Calculator of all your Financial Activities, NetWorth and Estimated Taxes. MyMonEE consists of 11 Activities into which individual transactions of events are entered and summarized. The Activities are: BankAccounts, Bonds, Funds_Stocks, Insurance, OtherIncome (wages,tips, etc), Liabilities (credit cards, mortages,loans), Property (personal and real), Retirement investments, Summaries, NetWorth and Taxes. Property inventories and Amortization schedules can be created. Yields, for Funds and Stocks, can be calculated. OnLine help for each activity. All ActivityHelp, Activity and Summary files can be printed. The Taxes Activity is a comprehensive set of files which will give, as an end result, an up-to-date calculation of the user's current tax year's estimated tax. With this information, tax strategy, quarterly estimated tax payments, etc. can be analyzed and revised. Updated versions of MyMonEE are not required if tax rates are changed. New or changed tax rates can be entered into the program by the user. Version 1.1 changes are listed in MyMonee 1.1 Read Me. Thank you. Robert E. Presender [email protected]

File Name: net-calculator-10b1.hqx (212 k)
Date: Mar 11, 1997
From: [email protected] (Joshua Graessley) Subject: NetCalculator 1.0b1 - calculate IP adresses and masks NetCalculator is a simple tool to help calculate IP adresses and masks as well as converting AppleTalk addresses to and from hexadecimal. Instructions 1) Launch the application. 2) Enter a value and press return or enter. 1997 Joshua Graessley and the ag group, inc.

File Name: newt-credit.hqx (8 k)
Date: Mar 13, 1998
From: [email protected]tiger.net Subject: Newton Credit Card Format Verification Formulas and standalone Newton calculator. Verifies a credit card number's FORMAT is correct. Requires NOS 2.x http://www.geocities.com/SiliconValley/Haven/1490/ Allan Beihl [email protected]

File Name: ninja-calc-05.hqx (44 k)
Date: Jun 01, 2001
From: roger kumar Subject: NinjaCalc 0.5 NinjaCalc 0.5 is an update of NinjaCalc 0.1 NinjaCalc is a stack-based, RPN calculator for Mac OS X. Version 0.5 adds full support for stack view and data entry in hexadecimal and binary format, as well as error notification in the case of saturation or precision loss. This software is free and without warranty.

File Name: noong-wind-chill.hqx (900 k)
Date: Jul 28, 2001
From: Robert Boeckman Subject: N0ONG Wind Chill Calculator A simple Freeware utility for calculating wind chill. Wind chill is calculated when the wind speed is over 4 MPH and the temperature is 50 or below. If these values are exceeded the result window will display "No Wind Chill" [email protected] www.black-hole.com/users/tardis

File Name: object-plant-21.hqx (3320 k)
Date: Nov 11, 1999
From: Mikael Arctaedius Subject: ObjectPlant 2.1.6, object-oriented analysis and design tool The ObjectPlant is a shareware program for Object Oriented Analysis and Design. It supports the OMT and UML notations and its main features are: + Object Model Diagrams + Event Trace Diagrams + State Diagrams + Use Case Diagrams + Exporting diagrams in either PICT or EPS format + C++ and Java code generation + Only 25 USD for a single user license + For 10 USD extra you also get a Java and C++ parser to reverse engineer code Requirements: System 7.1 or higher 68020 or better Info, updates etc can be found at Mikael Arctaedius Stockholm, Sweden

File Name: paragon-poker-pal-10.hqx (96 k)
Date: Mar 17, 2002
From: "Nick Trout" Subject: Paragon Poker Pal 1.0 Paragon Poker Pal is a neat poker calculator that provides the winning odds on any Texas Hold Em poker hand. Sports a simple, easy-to-use, friendy calculator interface. Simply enter your cards as they are dealt and Poker Pal will tell you the odds of winning as a percentage and suggest the correct play. User options include calculation/accuracy speed as well as style of play (from tight to loose). Poker Pal will suggest how to play your hand based on the style setting. Amaze your Friday-night-poker buddies and win in the long run while playing on online card rooms (authorized for recreational use only!). There are many Poker books on the market - one thing all the experts agree on is the fact that any player who plays to the odds in Poker will win in the long run!! This calculator is like having a giant Scarne's book containing every single Hold Em permutation at your fingertips! LICENSE: Shareware US$29.95 SYSTEM REQUIREMENTS: System 7 or later. 1MB RAM. (G3 or faster strongly recommended).

File Name: parser-125.hqx (120 k)
Date: Sep 11, 1999
From: [email protected] Subject: Parser 1.2.5 The Mathematical Expression Parser (a C++ library with full source code and stand alone test app) can parse numerical expressions or functions such as "sqrt( sin( 1.2e-3) - 2*y)", containing variables with arbitrary names. It is written with function plotters, spreadsheets and curve fitters in mind -- programs that need to very quickly evaluate the same function many times, changing the values of variables in between. Evaluation speeds are typically 30-90% as fast as directly compiled code. (The included test application allows you to check this claim for yourself.) Thus, this is among the fastest parsers available, yet safe since it checks for error conditions such as division by zero before conducting these operations. Supports: +, -, *, /, %, ^ (power), -(unary), !, &&, ||, ==, !=, <=, >=, <. >, ?: (for piecewise continuous functions), &, |, !& (XOR), ~, exp, ln, log, abs, sqrt, ceil, floor, rand, sin, cos, tan, sec, csc, cot, asin, acos, atan, asec, acsc, acot, sinh, cosh, tanh, sech, csch, coth, and the following predefined constants: e, pi, true and false. Variables may have any name and are not limited in number. Parenthesis are handled to arbitrary depths. The library also does symbolic math and can take partial derivatives. You can scrap the numerical methods and use this library to directly evaluate derivatives at near compiled speeds! All calculations (except bitwise operations) are done with double precision floating point math. The included project file requires CW Pro 5, but the code base should compile on pretty much anything on any system. This code base is shareware, but is free for deployment in freeware applications. Enjoy, Ian Ollmann [email protected]

File Name: pcalc-222.hqx (1508 k)
Date: Jul 20, 2001
From: James Thomson Subject: PCalc 2.2.2 PCalc 2.2.2 is the latest version of my veteran scientific calculator application. It's a fully featured scientific calculator that works on Mac OS 8 and later, including native support for Mac OS X. It has a Reverse Polish Notation mode, and support for Binary, Octal and Hexadecimal calculations. 2.2.2 fixes a number of problems on Mac OS X, and with the help, and adds function key shortcuts for undo/cut/copy/paste and some new Euro currency conversions. It ships with a native Carbon version for Mac OS X, and a Classic version for Mac OS 8 and later. This release of PCalc is shareware, that means you can download it and try it out for free, but if you like it and continue to use it you should pay the US $10 registration fee. For more information, check out the official PCalc website at:

File Name: pcb-warrior-109.hqx (1080 k)
Date: Nov 06, 1998
From: [email protected] Subject: PCBWarrior 1.09e This is the latest version of my PCBLayout-Software. It replaces all older versions. Thanks and greetings Klaus

File Name: pentiumath.hqx (12 k)
Date: Dec 11, 1994
Date: Fri, 9 Dec 1994 15:42:30 -0800 From: [email protected] (Jim Lanford) Subject: pentiuMath for Newton FreeWare, Humor, Newton, Calculator by Sarcastic Software A calculator that does "pentiuMath" Mac Version Available Jim Lanford [email protected]

File Name: plot3d-for-pro-fit.hqx (140 k)
Date: Jul 23, 1998
From: [email protected] Subject: Plot3D 2.1.0, QuickDraw3D models of functions and data Plot3D 2.1.0 is a free pro Fit plug-in for producing QuickDraw3D models of functions (surface plots) and data (surface plots and scatter plots with varying point sizes and color). 3D models can be interactively edited and exported as a high-resolution PICT or saved in the QuickDraw3D meta file format (.3dmf) for farther use on web-pages or for data exchange. This Plot3D plug-in works equally well with the free "pro Fit 5.1 trial", as well as with the commercial "pro Fit 5.1". Together with the pro Fit 5.1 trial version, it provides a comfortable free solution for producing QuickDraw3D interactive models of data and functions in a standard cartesian 3D representation. If you don't already have it, download the pro Fit 5.1 trial version from info-mac or from http://www.quansoft.com/trial.html. System Requirements: - System 7.5 or later - QuickDraw3D 1.5.4 or later - A CowerPC computer. For more information, please read the Read Me file enclosed, or visit the Web page: http://www.quansoft.com QuantumSoft Postfach 6613 CH-8047 Zurich, Switzerland e-mail: [email protected] http://www.quansoft.com/

File Name: power-calc-50.hqx (616 k)
Date: Oct 20, 1999
From: [email protected] Subject: PowerCalc 5.0 Now PowerCalc is more user-friendly than ever. Version 5.0 includes a tape window to record all the calculations that have been entered into PowerCalc. The data in this window may be saved to a file and opened later. It can also be printed or copied into another program. Recording may be toggled on and off by clicking on the "Record" check box in the tape window. Version 5.0 also features built-in constants for atomic number and mass values for all the elements on the periodic table. These may be easily accessed and entered into the calculator from the constants palette. Other function palettes contain buttons for unit conversions, trigonometry, probability, exponential, integer, bitwise, relational, and logical operations. As always, PowerCalc supports full balloon help. If you ever have any question about what a particular button does, just turn on balloon help and point to it. A balloon will pop up explaining how to use the feature. PowerCalc can store up to 1000 values in memory, and PowerCalc's interface is completely customizable. PowerCalc 5.0 is 100% compatible with Apple's new version of the Appearance control panel. Also, PowerCalc 5.0 is optimized for the G4 Velocity Engine. Of course, all PowerPC and 68K Macintosh models are also supported. PowerCalc is the perfect program for anyone interested in a powerful, easy-to-use shareware calculator for Mac OS.

File Name: powercalc-jm-31.hqx (488 k)
Date: Feb 05, 1999
From: [email protected] Subject: PowerCalc 3.1 PowerCalc is a powerful shareware calculator with dozens of useful mathematical functions. It has a user-friendly interface, persistent memory, eight layers of parentheses, balloon help, and even a backspace key in case you type the wrong number. It supports normal, scientific, and engineering notations, and it can even do operations with infinity. You have to see it to believe it! PowerCalc is a must-have program for mathematicians anywhere. Requires Mac OS 7.6 or higher and 1024K RAM. Color monitor recommended.

File Name: powercalc-jm-32.hqx (488 k)
Date: Apr 24, 1999
From: [email protected] Subject: PowerCalc 3.2 PowerCalc - is a powerful shareware calculator with dozens of useful mathematical functions. It has a user-friendly interface, persistent memory, twenty layers of parentheses, balloon help, and even a backspace key in case you type the wrong number. It supports normal, scientific, and engineering notations, and it can even do operations with infinity. You have to see it to believe it! PowerCalc is a must-have program for mathematicians anywhere. Requires Mac OS 7.6 or higher and 1024K RAM.

File Name: powercalc-lite-jm-31.hqx (444 k)
Date: Feb 05, 1999
From: [email protected] Subject: PowerCalc Lite 3.1 PowerCalc Lite is a calculator for those of you who don't need all the complexity of PowerCalc. Think of it as PowerCalc on a diet. This program is a great replacement for Apple's out-of-date calculator that came bundled with your computer. Requires Mac OS 7.6 or higher and 512K RAM. Color monitor recommended.

File Name: powercalc-lite-jm-32.hqx (448 k)
Date: Apr 24, 1999
From: [email protected] Subject: PowerCalc Lite 3.2 PowerCalc Lite - is a calculator for those of you who don't need all the complexity of PowerCalc. Think of it as PowerCalc on a diet. This program is a great replacement for Apple's out-of-date calculator that came bundled with your computer. Requires Mac OS 7.6 or higher with 512K RAM.

File Name: procdoc.hqx (1088 k)
Date: Apr 03, 1999
From: [email protected] Subject: ProcDoc.hqx ProcDoc is an application for Mac developers that assists in the disassembly and construction of the Mixed Mode Manager's ProcInfoType data structures. It provides a very easy to use and fully featured ProcInfo calculator, and can take existing ProcInfo values and convert them into the series of Apple standard C macros that more than likely created them which can then be pasted directly into your source files for compilation. Thanks, Nathan Duran [email protected]

File Name: quantum-fog-16.hqx (664 k)
Date: Jun 24, 2003
From: [email protected] Subject: Quantum Fog1.6 Quantum Fog 1.6 is a freeware Mac application for modelling physical situations that exhibit quantum mechanical behavior. It is a tool for investigating and discussing quantum measurement problems graphically, in terms of network diagrams called quantum Bayesian nets. It simulates a general purpose quantum computer. Quantum Fog 1.6 runs on MacOs Classic 7.1 or higher. For more information (html manual, examples, pdf textbook, humor, etc.) see www.ar-tiste.com

File Name: rampe-305.hqx (116 k)
Date: Jun 30, 1998
From: [email protected] Subject: Rampe(EM)3.0.5 Software of Ramp-related folds " forward " modeling Currently the following modes of folding are simulated: *** Fault-bend folding: the fracture preexists to folding (Suppe 1983); there are 2 modes, but only the first seems geologically realistic. *** Fault-propagation folding: foldind and fracturing are synchronous (Suppe 1985, Jamison1987). Late-stage evolutions are possible (Mercier et al.;1997) *** Chester & Chester folding: (generalized Fault-propagation folding) a combination of the two precedents (Chester & Chester 1990). key words: structural geology, tectonics, ramp, fold, fault, forward modelling

File Name: repeating-decimals-10.hqx (88 k)
Date: Nov 27, 1999
From: "Andrew D. Merenbach" Subject: Repeating Decimals 1.0 This program outputs a text file with the result of a division problem--but it outputs as many digits as you want it to, so it's much better for repetend research than a simple 8-,9-, or 10-digit calculator screen. REQUIREMENTS: AppleScript, and at least 200k of RAM -- Andrew D. Merenbach The Techie Group

File Name: rpn-calculator-192.hqx (1360 k)
Date: Sep 03, 2003
From: [email protected] Subject: RPN Calculator V1.92 for Mac OS 9 RPN Calculator is a robust implementation of RPN for Macintosh. It has a few features that distinguish it from the crowd, such as dealing with complex numbers the right way and being able to tell you if a number is perfect or not, among other uncommon functions. This build is functionally identical to V1.91 and removes the remaining GUI debris from the OS X to OS 9 port.

File Name: rpn-calculator-osx-194.hqx (1948 k)
Date: Feb 19, 2004
From: [email protected] Subject: RPN Calculator 1.94 for Mac OS X RPN Calculator for Mac OS X is a Carbon implementation of Reverse Polish Notation (RPN). It is stable and has been tested by hundreds of users for over two years. The calculator features a straightforward, "no frills" interface that expands as needed via floating tool palettes. This particular app is one of the very few Mac OS calculators that can handle complex arithmetic with no extra work on the user's part. Specific features include: * Complex number support in most every scientific function, where it makes sense. * Wide dynamic range via Victor Shoup's NTL (http://www.shoup.net). * Wide selection of scientific functions, including "special" functions. * Systems of equations up to 5 unknowns. * Stats palette. * Unit conversion palette. * Unusual functions, such as rational approximation, factoring, prime factorization and prime searches. * Programmable function palette. * Can log an entire session. * Unique implementation of stack operations, including drag-swaps and drag-drop into unary function buttons for in-place calculation. Check out the home page at http://www.rpncalculator.com.

File Name: sidekick-12.hqx (472 k)
Date: Feb 12, 2005
From: [email protected] Subject: Sidekick 1.2 Coffs Harbour, Australia - 9 February 2005 - dmg software updates Sidekick to version 1.2. Sidekick is a Mac OS X menu bar item that interacts with AppleWorks 6, making it easier to use and increasing your productivity. What's New * Quickly launch Apple's iWork applications, Pages and Keynote. * Reset AppleWorks preference files to their original state. * Launch Sidekick automatically when starting your Mac or logging into your User account. * Open Recent Items folder menu command. * Performance improvements. Sidekick 1.2 is a free upgrade for registered users. There is no need to re-enter a serial number. Simply quit Sidekick 1.1.1 and start using version 1.2. Sidekick 1.1.1 may then be deleted. Features Sidekick provides immediate access to AppleWorks' features from a single point: * Create a new document without first starting AppleWorks 6; * Search Google, Britannica.com, Encarta, online dictionaries or an online thesaurus from a word processing document; * Quickly access your most recently used documents; * Quickly launch Apple's iWork applications, PagesandKeynote; * Start Classic versions of AppleWorks 6 or AppleWorks 5 (if installed); * Reset AppleWorks preference files to their original state; * Find AppleWorks tips and help by opening popular Apple and third-party web sites; and * Easily launch companion applications including Address Book, Calculator and Key Caps. Pricing & Availability Sidekick can be purchased for $10.00 (USD). An evaluation version can be downloaded from: . Direct link to download: . Requirements Sidekick requires Mac OS X 10.2.8 or newer. AppleWorks 6.2.4 or newer (English, International English or French versions).

File Name: speech-fx-10.hqx (900 k)
Date: Aug 20, 1999
From: [email protected] Subject: SpeechFX 1.0 Welcome to SpeechFX. This software is designed to make the Speech Recognition software on your computer more useful. When Apple developed Speech Recognition, they created a software package with a lot of potential. The only thing it lacked was commands. Speech Recognition as Apple distributes it does not include very many commands. The commands that they do include are very crude and were designed just to show the potential of the software. They are not very useful to the average user. SpeechFX is a continuing project to create much needed commands for Speech Recognition. The commands that are available in this release are: About SpeechFX About this Computer -- Opens "About this Computer" window Connect To -- Go to a specific place on the web Duplicate -- Duplicate a File Get Info -- Opens "Get Info" Window Get My Calculator -- Opens Calculator Help Me -- Launches Help System (Mac OS 8.5 and later) Launch Web Browser -- Launches Web Browser Mantain Connection -- Launches Keep Me Online (Keep Me Online Users Only) Max Volume -- Turns Volume up to Max Mute Volume -- Mutes Volume New Folder -- Creates a new folder Normal Volume -- Turns Volume to a "Normal Level" Open Email -- Opens email client Open Extensions Manager -- Opens Extensions Manager Open Key Caps -- Opens Key Caps Open Stickies -- Opens Stickies Open -- Opens selection Print -- Prints Document Register -- Registers SpeechFX Restart -- Restarts Search -- Opens Sherlock (Mac OS 8.5 and Later) Set Monitor to 256 colors -- Sets Monitor to 256 Colors Set Monitor to Thousands -- Sets Monitor to Thousands of Colors Set Monitor to Millions -- Sets Monitor to Millions of Colors Show Clipboard -- Opens Clipboard What is my Lucky Number -- Finds your lucky number What is the Mac OS Version -- Gets Mac OS Version

File Name: statist-functions-22-hc.hqx (104 k)
Date: Jun 04, 1999
From: [email protected] Subject: StatistFunctions2.2 / HyperCard stack statistical PDFs and CDFs StatistFunctions version 2.2 -------------------- This HyperCard stack by Oscar van Vlijmen computes many statistical functions with high accuracy. Combinatorial functions e.g.: draws, permutations (and factorials even for large numbers!), variations, combinations. Probability density functions e.g.: hypergeometric (Lucky 10, Lotto), binomial (football toto), negative binomial, multinomial, Poisson, normal. Cumulative distribution functions e.g.: standard normal and inverse, binomial, negative binomial, negative exponential, Erlang, gamma, beta, chi square, F, T, Cauchy, Rayleigh, error function. Just for free I've thrown in an Erlang B/C traffic calculator. Can also be used for very large traffic units and number of trunks. Many functions are clearly explained, although this stack is not a course in statistics. Emphasis is on statistical usefulness and accuracy, even for big numbers, not on frills. New in version 2.2: * Distributions added (Tukey-lambda, logistic, cumulative hypergeometric, Von Mises). * Separate cards for some of the used special functions (gamma, beta, incomplete gamma & beta, modified Bessel functions). * More explanations for Erlang B&C. * Navigational index card. Freeware; not to be used for commercial applications; not on CD-ROM's.

File Name: statist-functions-24.hqx (140 k)
Date: Dec 26, 1999
From: Oscar van Vlijmen Subject: StatistFunctions2.4 / HyperCard stack statistical PDFs and CDFs StatistFunctions version 2.4 -------------------- This HyperCard stack by Oscar van Vlijmen computes many statistical functions with high accuracy. Combinatorial functions: draws, permutations (and factorials even for large numbers!), variations, combinations. Probability density functions: hypergeometric (Lucky 10, Lotto), binomial (football toto), negative binomial, multinomial, Poisson, normal. Cumulative distribution functions: standard normal and inverse, binomial, negative binomial, chi square, Cauchy, discrete log-series, Erlang, negative exponential, extreme value, logistic, gamma, beta, F, T, non-central T, Pareto, Rayleigh, Rice, Tukey-Lambda, Von Mises, Wakeby, Weibull. Special functions: gamma, incomplete gamma, beta, incomplete beta, error, factorial, Lerch transcendent, modified Bessel of first kind. Plus an Erlang B/C traffic calculator, usable for very large traffic units and number of trunks. Many functions are clearly explained, although this stack is not a course in statistics. Emphasis is on statistical usefulness and accuracy, even for big numbers, not on frills. All input and output is saved in a text field. New in version 2.4: * Added separate button for accurate modified Bessel function of the first kind and order 1. * Fixed the limit of z=38 for cumulative standard normal distribution. Now you can enter very large arguments. * Added the special function Lerch transcendent. * Added distributions: discrete logarithmic series distribution (CDF), the difficult to compute non-central T distribution (CDF), the Rice distribution (PDF & CDF). Freeware; not to be used for commercial applications; not on CD-ROMs.

File Name: std-map-37.hqx (128 k)
Date: Aug 18, 2000
From: "James D. Meiss" Subject: StdMap 3.7 ***StdMap version 3.7*** StdMap runs on any PPC mac with MacOS 8.5 or later. If you have a 68K Mac or do not have MacOS 8.5, get an earlier version (e.g. 3.4). What it does Standard Maps displays the dynamics of several "area preserving" mappings. It will also find periodic orbits, cantori, and stable and unstable manifolds of any (symmetric) periodic orbit. It allows you to iterate curves, single step along orbits, etc. For more info see:

File Name: stock-calculator-11.hqx (408 k)
Date: Jun 27, 1999
From: "System Support Products, Inc." Subject: Stock Calculator 1.1 for Macintosh Note to Archivist: This file should replace /app/stock-calculator.hqx This file may be included on the Info-Mac CD-ROM archives. Stock Calculator 1.1 Copyright 1998 System Support Products, Inc. Written by Lou Forlini Stock Calculator is the perfect assistant for anyone doing on-line stock trading! Stock Calculator is a stock trade profit/loss and share price calculator application. Stock Calculator is also ideal for performing 'what if' analyses, such as determining what share price a stock needs to attain in order to return a specified profit. When buying stock, Stock Calculator can determine the total cash outlay, per share buying price, or number of shares. When selling stock, Stock Calculator can take the buy information and determine the profit amount and total return percentage, or the per share selling price. Flat rate or percentage commissions can be included in the calculations. A built-in Stock Fractions table is available for performing at-a-glance conversions between dollar amount share prices and stock fractions in 1/64 increments. New Features for Release 1.1 o New Total Return percentage field added. o Show Fractions Window option moved to new View menu. o Program corrections SYSTEM REQUIREMENTS Stock Calculator requires an Apple Macintosh or compatible with a PowerPC, 68020 or greater processor, using Mac OS 7.5 or later.

File Name: stock-calculator.hqx (392 k)
Date: May 01, 1999
From: [email protected] Subject: Stock Calculator 1.0 for Macintosh Stock Calculator 1.0 Copyright 1998 System Support Products, Inc. Written by Lou Forlini Stock Calculator is the perfect assistant for anyone doing on-line stock trading! Stock Calculator is a profit/loss and share price calculator application. Stock Calculator is also ideal for performing 'what if' analyses, such as determining what share price a stock needs to attain in order to return a specified profit. When buying stock, Stock Calculator can determine the total cash outlay, per share buying price, or number of shares. When selling stock, Stock Calculator can take the buy information and determine the profit amount or the per share selling price. Flat rate or percentage commissions can be included in the calculations. A built-in Stock Fractions table is available for performing at-a-glance conversions between dollar amount share prices and stock fractions in 1/64 increments. SYSTEM REQUIREMENTS Stock Calculator requires an Apple Macintosh or compatible with a PowerPC, 68020 or greater processor, using Mac OS 7.5 or later. - Lou Forlini Software Engineer System Support Products, Inc. http://www.netcom.com/~sspi mailto:[email protected]

File Name: stock-calculator-newton.hqx (28 k)
Date: Feb 03, 1998
From: [email protected] Subject: Stock Calculator for Newton Stock Calculator is the perfect assistant for anyone doing online stock trading! Besides total cash outlay and profit/loss calculations, Stock Calculator is ideal for performing 'what if' analyses, such as determining what share price a stock needs to attain in order to return a specified profit. When buying stock, Stock Calculator can determine the total cash outlay, per share buying price, or number of shares. The user selects which field to calculate and enters values for the remaining fields. When selling stock, Stock Calculator can determine the profit amount or the per share selling price. The user selects which field to calculate and enters a value for the remaining field along with the buy information. Flat rate or percentage commissions can be included in the calculations. Stock Calculator can also be used as a quick stock fraction converter, converting between dollar amount share prices and stock fractions in 1/64 increments. System requirements: Newton with OS 1.x or 2.x For more information please see the enclosed Read Me file, or visit SSPI's web site at: http://www.netcom.com/~sspi/stockcalc.html Thank you, Lou Forlini Software Engineer System Support Products, Inc.

File Name: structurix-10-ppc.hqx (1252 k)
Date: Dec 23, 2001
From: Yannick CALLAUD Subject: Structurix PPC 1.0.0 en Structurix-PPC-100-EN is a calculation programme based on the principle of the finite elements. It makes it possible to solve plane problems with elements: bars, beams and triangulars. As well as space problems with elements: bars and beams. Lastly, ElemFin allows the calculation of: displacements of each nodes, reactions to the supports and stress in each element. Version PPC

File Name: tctc-10.hqx (484 k)
Date: Mar 01, 2001
From: Christian Fritz Subject: TcTC 1.0, Timecode Converter and Calculator TcTC is a timecode converter and calculator application. Timecodes, edgecodes and framecounts can be converted into several other formats simultaneously. The basic math operations can be performed on these timecodes. The supported TC formats are PAL, NTSC Drop, NTSC Non-Drop, HD/Film 24p, 35mm, 16mm20, 16mm40, framecount, as well as TC and EC formats with freely selectable framerates (currently between 1 and 100 fps/fpe). An offset management system deals with situations in which timecodes have changed due to transfers. If the same frame that originated on a piece of film and is identified there by an edgecode is transferred to, say, two different tapes and ends up there having two entirely unrelated timecodes, TcTC offers a method of establishing a relation between these different, essentially arbitrary edgecodes and timecodes and thus allows you to keep track of the footage in the various places. TcTC requires a Macintosh with a PPC processor and MacOS 8.5 or higher.

File Name: the-atomic-mac-357.hqx (472 k)
Date: Dec 28, 1999
From: Chris Smolinski Subject: The Atomic Mac 3.5.7 The Atomic Mac is a periodic table of the elements for the Macintosh. In addition to the usual information found in such programs, The Atomic Mac also contains a wealth of nuclear information on each isotope, including half life, decay mode, and daughter products. X-ray data (fluorescence and binding energies) is also available. A molecular weight calculator makes it easy to find the molecular weight of compounds. A shaded diagram showing the ranges of physical properties makes it easy to visualize relationships across the periodic table. Data is displayed for the following physical properties: Density Heat of Vaporization Heat of Fusion Specific Heat Thermal Conductivity Linear Expansion Coefficient Melting Point Boiling Point Atomic Radius Covalent Radius Magnetic Susceptability Electrical Resistivity Electron Affinity Electric Dipole Polarizability State (gas, liquid, solid) Photoelectric Work Function Electronegativity Crystal Structure Valence Shareware: $25 Chris Smolinski - Web URL: http://www.blackcatsystems.com Macintosh Software, Shortwave Radio, Spy Number Stations

File Name: the-atomic-mac-35.hqx (408 k)
Date: Sep 13, 1999
From: [email protected] Subject: The Atomic Mac 3.5.0 The Atomic Mac is a periodic table of the elements for the Macintosh. In addition to the usual information found in such programs, The Atomic Mac also contains a wealth of nuclear information on each isotope, including half life, decay mode, and daughter products. X-ray data (fluorescence and binding energies) is also available. A molecular weight calculator makes it easy to find the molecular weight of compounds. A shaded diagram showing the ranges of physical properties makes it easy to visualize relationships across the periodic table. Data is displayed for the following physical properties: Density Heat of Vaporization Heat of Fusion Specific Heat Thermal Conductivity Linear Expansion Coefficient Melting Point Boiling Point Atomic Radius Covalent Radius Magnetic Susceptability Electrical Resistivity Electron Affinity Electric Dipole Polarizability State (gas, liquid, solid) Photoelectric Work Function Electronegativity Crystal Structure Valence Shareware: $25 Chris Smolinski - Web URL: http://www.blackcatsystems.com Macintosh Software, Shortwave Radio, Spy Number Stations

File Name: the-atomic-mac-53-osx.hqx (1412 k)
Date: Apr 21, 2002
From: Chris Smolinski Subject: The Atomic Mac OSX 5.3.0 The Atomic Mac is a periodic table of the elements for the Macintosh. In addition to the usual information found in such programs, The Atomic Mac also contains a wealth of nuclear information on each isotope, including half life, decay mode, and daughter products. X-ray data (fluorescence and binding energies) is also available. A molecular weight calculator makes it easy to find the molecular weight of compounds. A shaded diagram showing the ranges of physical properties makes it easy to visualize relationships across the periodic table. The Atomic Mac is a periodic table of the elements for the Macintosh. In addition to the usual information found in such programs, The Atomic Mac also contains a wealth of nuclear information on each isotope, including half life, decay mode, and daughter products. X-ray data (fluorescence and binding energies) is also available. A molecular weight calculator makes it easy to find the molecular weight of compounds. A shaded diagram showing the ranges of physical properties makes it easy to visualize relationships across the periodic table. Photon interaction data, both in tabular and graphical format is also available. Data is displayed for the following physical properties: Density Heat of Vaporization Heat of Fusion Specific Heat Thermal Conductivity Linear Expansion Coefficient Melting Point Boiling Point Atomic Radius Covalent Radius Magnetic Susceptability Electrical Resistivity Electron Affinity Electric Dipole Polarizability State (gas, liquid, solid) Photoelectric Work Function Electronegativity Crystal Structure Abundance in Earth's Crust Abundance in Earth's Sea Abundance in Earth's Atmosphere Abundance in Solar System Photon Interactions Visible Light Spectra Magnetic Dipole Moment Electric Quadrupole Moment

File Name: the-atomic-mac-53-ppc.hqx (1412 k)
Date: Apr 21, 2002
From: Chris Smolinski Subject: The Atomic Mac 5.3.0 The Atomic Mac is a periodic table of the elements for the Macintosh. In addition to the usual information found in such programs, The Atomic Mac also contains a wealth of nuclear information on each isotope, including half life, decay mode, and daughter products. X-ray data (fluorescence and binding energies) is also available. A molecular weight calculator makes it easy to find the molecular weight of compounds. A shaded diagram showing the ranges of physical properties makes it easy to visualize relationships across the periodic table. The Atomic Mac is a periodic table of the elements for the Macintosh. In addition to the usual information found in such programs, The Atomic Mac also contains a wealth of nuclear information on each isotope, including half life, decay mode, and daughter products. X-ray data (fluorescence and binding energies) is also available. A molecular weight calculator makes it easy to find the molecular weight of compounds. A shaded diagram showing the ranges of physical properties makes it easy to visualize relationships across the periodic table. Photon interaction data, both in tabular and graphical format is also available. Data is displayed for the following physical properties: Density Heat of Vaporization Heat of Fusion Specific Heat Thermal Conductivity Linear Expansion Coefficient Melting Point Boiling Point Atomic Radius Covalent Radius Magnetic Susceptability Electrical Resistivity Electron Affinity Electric Dipole Polarizability State (gas, liquid, solid) Photoelectric Work Function Electronegativity Crystal Structure Abundance in Earth's Crust Abundance in Earth's Sea Abundance in Earth's Atmosphere Abundance in Solar System Photon Interactions Visible Light Spectra Magnetic Dipole Moment Electric Quadrupole Moment

File Name: trajecmulator-10.hqx (304 k)
Date: Nov 01, 1999
From: [email protected] Subject: Trajecmulator 1.0 E Trajecmulator is a 3D simulator of particle movement : give the mass of the particle, its charge the coefficient of fluid friction, the initial velocity, the gravity, electrical and magnetic fields ans the angles of wiew to see the trajectory of the particle. You can also generate lists of numerical data... System requirements: Mac OS 7 1MB of RAM. 300KB on your hard drive. Resolution: at least 640x480

File Name: turbo-mcs-controller.hqx (1196 k)
Date: Nov 06, 2000
From: Erik Jensen Subject: TurboMCS Controller TurboMCS Controller is an application to interface with the Perkin Elmer (nee EG&G) TurboMCS Controller, a multichannel scaler hardware unit. The TurboMCS Controller software uses a serial connection between a Mac and the TurboMCS hardware to set various parameters and to control the data acquisition. The TurboMCS Controller software allows full access to the hardware features and can download the data quickly over the serial connection. the TurboMCS Controller software is free for use, although I have requested a donation to charity from those who find it useful. I am the author of this software, so any questions or suggestions can be directed to me at [email protected] The web page for the software is at .

File Name: tx-wizard-21.hqx (328 k)
Date: Dec 26, 2001
From: "J. Barnholt" Subject: TXWizard 2.1 Author: Jan Barnholt ([email protected], [email protected]) Homepage: http://homepage.ruhr-uni-bochum.de/Jan.Barnholt/sw/ Contact: [email protected] Version: 2.1 Shareware: 5 Euro Category: OS Requirements: MacOS 8.1 or better HW Requirements: Any PowerPC Macintosh The TXWizard is a collection of utilities for the YAMAHA TX16W digital sampler including sample converter, tools for handling TX16W setup files as well as simple Editor-Modules. See included PDF document for a detailed description. The TXWizard is shareware, meaning that you should send me a small shareware-fee if you like and use the program. This program may be included on CDROMS as long as the archive remains unchanged.

File Name: universal-conversion-calc.hqx (1224 k)
Date: Dec 23, 2000
From: John Subject: Universal Conversion Calculator Universal Conversion Calculator attempts to be just that. A conversion calculator that will convert just about anything in one unit, or sets of units, into another. Hundreds of units are built in, and a nearly unlimited number of custom units can be made from the built in units. If you need to know what 10 Furlongs per Fortnight are in Bolts of Cloth per Light Year, then Universal Conversion Calculator is for you. It is a FAT program and requires System 8 or later.

File Name: vivistar-calculator.hqx (72 k)
Date: Apr 16, 1999
Date: Wed, 18 Aug 1993 22:47:38 -0500 (CDT) From: [email protected] Subject: Vivistar RPN Calculator VIVISTAR CALCULATOR RPN INFIX HEXADECIMAL OCTAL FINANCIAL HEX RPNCALC RPN Calculator with any base from 2 to 16, transcendentals, 19 displayable digits, memory registers, remembers location on screen, user selectable display types, financial functions (pv, pmt, fv, n, i), permutations, combinations, & online help. Also includes instructions on how to use reverse polish notation. System 7, 32-bit, and virtual memory compatible. $10 shareware. Closing bug fix.

File Name: wiz-calc-033.hqx (504 k)
Date: Oct 26, 1999
From: [email protected] Subject: WizCalc 0.33 Freeware A handy, user-friendly and - most excellently - free software calculator for musicians Music vs. math, intuition vs. calculation. Here to bridge the gap between two disparate worlds is WizCalc. In a jiffy, this little tool figures out delay times for you and makes it easy to adapt loop speeds and sample rates or find MIDI controller numbers. Remember when you checked into math class and your mind checked out? Simply run WizCalc next to your sequencer and never again will you curse the shortcomings of a teenage attention span. Conversion and display options bpm --> ms, msec --> bpm, loops (speed, length, sampling rate, PB range), (pitch frequency >note number and vice versa, SMPTE time (ms--> fps). Plus a comprehensive list of all MIDI controllers and GM instruments.

File Name: yp-geneva-mechanism-10.hqx (392 k)
Date: Jan 10, 2001
From: Yves Pelletier Subject: YP Geneva Mechanism 1.0 (mechanical engineering) A Geneva mechanism is used to provide an intermittant rotational motion of the driven part while the driver wheel rotates continuously. This program simulates a Geneva mechanism with 4 or 6 slots. It displays graphs describing the angular position and the angular velocity of both parts of the mechanism, and it can also draw the tangential velocity of both parts. System Requirements: YP Geneva Mechanism runs on any Macintosh computer with MAC OS 7.0 or later. It needs about 700 Kb on your hard disk and 1 Mb of RAM.

File Name: zip-calc-mac-101.hqx (1440 k)
Date: Nov 15, 1999
From: Hal Gumbert Subject: ZipCalc 1.0.1 ZipCalc 1.0.1 has been released. ZipCalc is an application that measures distance between zipcodes and finds other zipcodes in a given radius. This is a new application available for both Macintosh and Windows. Features: Latitude Logitude Distance Calculator, Calculate distance in miles from one set of Latitude Longitude coordinates to another set. Zipcode Distance Calculator, Calculate distance in miles from one zipcode to another zipcode. Find Zipcodes with in a given radius, Find zipcode within a given number of miles from a central zipcode. Short Description: ZipCalc measures zipcode distances and finds other zips in a given radius. Cost $50.