piezo help
Posted by: stebbutt <stebbutt@...>
what it would be like if you were using a piezo with a pre-amp.
I would check to make sure the battery is good (which sounds like it
is). Sometimes with 9 volts, the wires on the battery plug can fray or
break, so check the battery wires next. Then I would check your guitar
jack and try a different patch cable, to see if there is a short there.
After that, you are probably looking at dismantling the preamp control
to see if there are any wires obviously loose.
Good Luck,
Stacy
klsluder wrote:
> I am having problems with the pickup on my Peavey E/A. Same guitar
> that earlier this year I was considering using electric strings on to
> make it easier to play. All it needed was the action adjusted and now
> it plays great.
>
> The problem now is I have to turn the amp up nearly all the way to get
> any volume. It used to have lots of volume. I changed the battery,
> which didn't help. The sound is clean, just quiet. If it were the
> battery wouldn’t it be distorted? If there were a loose connection it
> wouldn't work at all right? I am baffled. Am I missing something? Ideas?
>
> I would love to upgrade to a better pickup system but that is not a
> financial option at the moment.
>
> Peace
> Kevin
>
> --
> To unsubscribe, send ANY message to:
> christianguitar-unsubscribe@welovegod.org
>
>