Tools
Quote from Forum Archives on September 3, 1999, 1:15 pmPosted by: clean-hewmor <clean-hewmor@...>
TOOLSHAMMER: Originally employed as a weapon of war, the hammer nowadays is used as
a kind of divining rod to locate expensive parts not far from the object we are
trying to hit.MECHANIC'S KNIFE: Used to open and slice through the contents of cardboard
cartons delivered to your front door; works particularly well on boxes
containing seats and motorcycle jackets.ELECTRIC HAND DRILL: Normally used for spinning steel Pop rivets in their holes
until you die of old age, but it also works great for drilling mounting holes
in fenders just above the brake line that goes to the rear wheel.PLIERS: Used to round off bolt heads.
HACKSAW: One of a family of cutting tools built on the string-push principle.
It transforms human energy into a crooked, unpredictable motion, and the more
you attempt to influence its course, the more crooked its path becomes.VISE-GRIPS: Used to round off bolt heads. If nothing else is available, they
can also be used to transfer intense welding heat to the palm of your hand.OXYACETELENE TORCH: Used almost entirely for lighting various flammable objects
in your garage on fire. Also handy for igniting the grease inside a brake drum
you're trying to get the bearing race out of.WHITWORTH SOCKETS: Once used for working on Older British cars and motorcycles,
they are now used mainly for impersonating that 9/16 or 1/2 socket you've been
searching for for the last 15 minutes.DRILL PRESS: A tall upright machine useful for suddenly snatching flat metal
bar stock out of your hands so that it smacks you in the chest and flings your
milkshake across the room, splattering it against that freshly painted part you
were drying.WIRE WHEEL: Cleans rust off old bolts and then throws them somewhere under the
workbench with the speed of light. Also removes fingerprint whorls and
hard-earned guitar calluses in about the time it takes to say, "Ouc...."HYDRAULIC FLOOR JACK: Used for lowering a motorcycle to the ground after you
have installed your new front disk brake setup, trapping the jack handle firmly
under the front fender.EIGHT-FOOT LONG DOUGLAS FIR 2X4: Used for levering a motorcycle upward off a
hydraulic jack.TWEEZERS: A tool for removing wood splinters.
PHONE: Tool for calling your neighbor to see if he has another hydraulic floor
jack.SNAP-ON GASKET SCRAPER: Theoretically useful as a sandwich tool for spreading
mayonnaise; used mainly for getting the dog-doo off your boot.E-Z OUT BOLT AND STUD EXTRACTOR: A tool that snaps off in bolt holes and is ten
times harder than any known drill bit.TIMING LIGHT: A stroboscopic instrument for illuminating grease buildup.
TWO-TON HYDRAULIC ENGINE HOIST: A handy tool for testing the tensile strength
of ground straps and brake lines you may have forgotten to disconnect.CRAFTSMAN 1/2 x 16-INCH SCREWDRIVER: A large motor mount prying tool that
inexplicably has an accurately machined screwdriver tip on the end without the
handle.BATTERY ELECTROLYTE TESTER: A handy tool for transferring sulfuric acid from a
car battery to the inside of your toolbox after determining that your battery
is dead as a doornail, just as you thought.AVIATION METAL SNIPS: See hacksaw.
TROUBLE LIGHT: The mechanic's own tanning booth. Sometimes called a drop light,
it is a good source of vitamin D, "the sunshine vitamin," which is not
otherwise found under motorcycles at night. Health benefits aside, its main
purpose is to consume 40-watt light bulbs at about the same rate that 105-mm
howitzer shells might be used during, say, the first few hours of the Battle of
the Bulge. More often dark than light, its name is somewhat misleading.PHILLIPS SCREWDRIVER: Normally ussed to stab the lids of old-style
paper-and-tin oil cans and splash oil on your shirt; can also be used, as the
name implies, to round off Phillips screw heads.AIR COMPRESSOR: A machine that takes energy produced in a coal-burning power
plant 200 miles away and transforms it into compressed air that travels by hose
to a Chicago Pneumatic impact wrench that grips rusty bolts last tightened 40
years ago by someone in Sindelfingen, and rounds them off.PRY BAR: A tool used to crumple the metal surrounding that clip or bracket you
needed to remove in order to replace a 50 cent part.HOSE CUTTER: A tool used to cut hoses 1/2 inch too short.
Posted by: clean-hewmor <clean-hewmor@...>
HAMMER: Originally employed as a weapon of war, the hammer nowadays is used as
a kind of divining rod to locate expensive parts not far from the object we are
trying to hit.
MECHANIC'S KNIFE: Used to open and slice through the contents of cardboard
cartons delivered to your front door; works particularly well on boxes
containing seats and motorcycle jackets.
ELECTRIC HAND DRILL: Normally used for spinning steel Pop rivets in their holes
until you die of old age, but it also works great for drilling mounting holes
in fenders just above the brake line that goes to the rear wheel.
PLIERS: Used to round off bolt heads.
HACKSAW: One of a family of cutting tools built on the string-push principle.
It transforms human energy into a crooked, unpredictable motion, and the more
you attempt to influence its course, the more crooked its path becomes.
VISE-GRIPS: Used to round off bolt heads. If nothing else is available, they
can also be used to transfer intense welding heat to the palm of your hand.
OXYACETELENE TORCH: Used almost entirely for lighting various flammable objects
in your garage on fire. Also handy for igniting the grease inside a brake drum
you're trying to get the bearing race out of.
WHITWORTH SOCKETS: Once used for working on Older British cars and motorcycles,
they are now used mainly for impersonating that 9/16 or 1/2 socket you've been
searching for for the last 15 minutes.
DRILL PRESS: A tall upright machine useful for suddenly snatching flat metal
bar stock out of your hands so that it smacks you in the chest and flings your
milkshake across the room, splattering it against that freshly painted part you
were drying.
WIRE WHEEL: Cleans rust off old bolts and then throws them somewhere under the
workbench with the speed of light. Also removes fingerprint whorls and
hard-earned guitar calluses in about the time it takes to say, "Ouc...."
HYDRAULIC FLOOR JACK: Used for lowering a motorcycle to the ground after you
have installed your new front disk brake setup, trapping the jack handle firmly
under the front fender.
EIGHT-FOOT LONG DOUGLAS FIR 2X4: Used for levering a motorcycle upward off a
hydraulic jack.
TWEEZERS: A tool for removing wood splinters.
PHONE: Tool for calling your neighbor to see if he has another hydraulic floor
jack.
SNAP-ON GASKET SCRAPER: Theoretically useful as a sandwich tool for spreading
mayonnaise; used mainly for getting the dog-doo off your boot.
E-Z OUT BOLT AND STUD EXTRACTOR: A tool that snaps off in bolt holes and is ten
times harder than any known drill bit.
TIMING LIGHT: A stroboscopic instrument for illuminating grease buildup.
TWO-TON HYDRAULIC ENGINE HOIST: A handy tool for testing the tensile strength
of ground straps and brake lines you may have forgotten to disconnect.
CRAFTSMAN 1/2 x 16-INCH SCREWDRIVER: A large motor mount prying tool that
inexplicably has an accurately machined screwdriver tip on the end without the
handle.
BATTERY ELECTROLYTE TESTER: A handy tool for transferring sulfuric acid from a
car battery to the inside of your toolbox after determining that your battery
is dead as a doornail, just as you thought.
AVIATION METAL SNIPS: See hacksaw.
TROUBLE LIGHT: The mechanic's own tanning booth. Sometimes called a drop light,
it is a good source of vitamin D, "the sunshine vitamin," which is not
otherwise found under motorcycles at night. Health benefits aside, its main
purpose is to consume 40-watt light bulbs at about the same rate that 105-mm
howitzer shells might be used during, say, the first few hours of the Battle of
the Bulge. More often dark than light, its name is somewhat misleading.
PHILLIPS SCREWDRIVER: Normally ussed to stab the lids of old-style
paper-and-tin oil cans and splash oil on your shirt; can also be used, as the
name implies, to round off Phillips screw heads.
AIR COMPRESSOR: A machine that takes energy produced in a coal-burning power
plant 200 miles away and transforms it into compressed air that travels by hose
to a Chicago Pneumatic impact wrench that grips rusty bolts last tightened 40
years ago by someone in Sindelfingen, and rounds them off.
PRY BAR: A tool used to crumple the metal surrounding that clip or bracket you
needed to remove in order to replace a 50 cent part.
HOSE CUTTER: A tool used to cut hoses 1/2 inch too short.