INGREDIENTS

INSTRUCTIONS

~-------------SOLE FOOD--------------------------------------------
The into steaks for grilling, or leave it whole for baking or poaching.
But if confronted by a thin Dover sole when craving fish and chips, or a
pudgy salmon when you want slivers of gravlax, it's good to know how to
fillet the fish yourself. While both flatfish and roundfish can be
filleted, they are approached differently. A flatfish is easy to spot; it
looks as if it has been run over by some underworld tractor. Flatfish swim
horizontally along the sea bottom, with both eyes facing upward. You can
obtain four nearly equal fillets from a flatfish, one from either side of
the backbone on both sides. To fillet a flatfish (sole, flounder, turbot,
Pacific halibut): Peel it by laying it flat on a counter with the dark side
up and the tail towards you. Slice off the tail, and insert the tip of a
knife until you have a grip on the skin. Holding the tail in place, pull
the skin back towards the head, over the head, and then down the light
colored side. Lay the fish on the counter with its eyes facing up. Cut down
the backbone along the center of the fish, then hold your knife at an angle
at the head end of one fillet. Lift the fillet with one hand, while
scraping gently with small strokes, using the bone structure to guide the
knife. Cut away the second fillet from the first side. Turn the fish over
and repeat the process. Roundfish, shaped like a tube, have a center
backbone, separating two thick fillets. A line of bones extends upward from
the spine, and a pair of bone creates an oval on the lower side of the
fish, enclosing the entrails. You can create four fillets, but usually one
is cut from each side. To fillet: Lay the fish on one side, with its tail
towards you. Slice along the backbone from head to tail, exposing the
backbone. Hold a knife parallel to the top ribs, cut down the length of the
fillet, using short strokes to detach it completely. Turn fish around, hold
it by the exposed backbone, and slice the other half of the fillet free.
Flip the fish over, and fillet the other side. To skin fillets, lay them
skin side down, and hold the tail end. Insert the knife at the shallow end
and scrape along the skin to separate the it from the fillets. Run your
fingers all along the top of the fillet and feel for pesky little bones.
They can easily be removed with tweezers, a gesture that will be greatly
appreciated by all who eat it.
From Gemini's MASSIVE MealMaster collection at www.synapse.com/~gemini

A Message from our Provider:

“This side of eternity we see only a fraction of the picture”